Call us!
+49 2204 70880

News

We are on company holidays from December 23rd 2023 until January 1st 2024

LoopPET AntiGraffiti ASLAN SRL 96 is the more sustainable way to protect against graffiti

Dirt and damage caused by graffiti in public spaces is annoying and costly, requiring intensive cleaning. As a solution to this issue, ASLAN has been successfully supplying the AntiGraffiti ASLAN SL 95 protective laminate for years. Now ASLAN‘s portfolio of laminates is being expanded to include a new product that provides safer and more sustainable protection against graffiti:

LoopPET AntiGraffiti ASLAN SRL 96 is the more sustainable way to protect against graffiti. This self-adhesive, highly transparent, 50 µm gloss laminate, is made from 70% recycled polyester (PCR-PET) and is specifically for the protection of printed media. Due to its special surface coating, the scratch-resistant laminate offers reliable protection against spray paint and contamination from permanent markers. Therefore, graffiti can be easily removed residue free. Aggressive anti-graffiti cleaners can also be used regularly without damaging the surface.


The product advantages at a glance:

• Raw film made from at least 70% recycled polyester (PCR-PET)
• A more sustainable version of the renowned AntiGraffiti ASLAN SL 95
• Graffiti can be removed from the surface without damaging the film
• Excellent cleaning properties (can be cleaned with aggressive cleaners)
• Scratch resistant
• Highly transparent, with a gloss finish
• Solvent-free, high-tack adhesive, also compatible with UV curable inks
• PVC, VOC and solvent free product
• No shrinkage
• Classified according to flame retardant standard Euroclass EN 13501-1 (B - s1, d0)
• Outdoor durability of up to 5 years

While the AntiGraffiti ASLAN SL 95 is still available from our product range, we would recommend swapping to the new product for sustainability reasons. There‘s no disadvantage to customers – just a slight difference in the surface tint if compared directly against each other. In partnership with ASLAN, it‘s another way you will be helping the environment.

 

...weiterlesen

When things get a little wild …MonsterLAM ASLAN SL 05

When things get a little wild …

A monster seldom comes alone! Now available is MonsterLAM ASLAN SL 05 , an extra durable 300µm protective overlaminate that protects digital prints under the toughest conditions – even UV prints. In the monstrous combination with the digitally printable MonsterTack ASLAN DFP 05 film, a solvent and lubricating oil-resistant composite, this combination can withstand even the toughest requirements, such as use on motocross or heavy-duty machines.

MonsterLAM ASLAN SL 05 is the ideal blend of thick protective film with high transparency, allowing for exceptional clarity of colour digital prints. Even printed metal and other special effect films show through as clear as a bell. The laminate is suitable for application on to flat and slightly curved surfaces, protecting them from stone chips and mechanical abrasion. However, we don't know yet whether it also protects against monsters!

The advantages of the new laminate at a glance:

  • stable 300 µm protective film made of PVC
  • perfect combination of thick protective film and high transparency
  • gives special protection against stone chips and high mechanical abrasion
  • hard-wearing; impact and abrasion-resistant; heavy-duty and robust
  • high gloss level and good scratch resistance
  • solvent-free high-tack adhesive system offers a strong bond to the substrate
  • compatible as a laminate with all common printing systems including UV curable inks
  • short and medium-term applications on flat and slightly curved surfaces
  • resistant to solvents and lubricating oil in combination with MonsterTack ASLAN DFP 05
...weiterlesen

More glass, more shine!

More glass, more shine!

high gloss is not enough for you? Then get to know our new, ultra-glossy protective laminate GalleryLAM ASLAN SL 98 now – a 125 µm thick PET film that combines functionality and aesthetics, giving digital prints an elegant finish as well as robust protection. The film is now available from stock.

Due to an ultra-glossy special surface coating, this PET laminate transforms prints and photographs into works of art. With intense contrasts of colour and light, they appear like a gallery print set behind glass. Its easy-to-clean property ensures that dirt and fingerprints can be easily removed. This film is also characterised by its resistance to many common household chemicals, cleaning agents, solvents and food. And if that wasn’t enough, it is insensitive to heat and grease splashes, and is therefore ideal for uses such as kitchen splashbacks.

The advantages of the new GalleryLAM ASLAN SL 98 at a glance:

  • PET ultra gloss film, 125 µm
  • 1.25 m x 25 m
  • Glass-clear, ultra-glossy, highly scratch-resistant, easy-to-clean
  • Classified according to the flame retardant standard Euroclass EN 13501-1 (C-s1, d0)
  • Solvent-free high-tack adhesive system
  • Dimensionally stable
  • Transforms also prints with UV curable inks without unwanted silvering
  • Outdoor durability of 3-5 years
...weiterlesen

More sustainable, clear whiteboard film made from PCR PET

Compared to our classic Clearboard ASLAN CB 90, it has an even better scratch-resistance and the same perfect wipeability as the original laminate, where even permanent markers don‘t leave the ghost writing effect. Being an environmentally conscious product, we only use water-based adhesives and the film is suitable for laminating on to UV prints.

Create customised whiteboards by combining the dry wipe film with coloured or printed films. This means maximum flexibility in terms of design, shape and size – extendable as required and combinable in a wide variety. The possibilities of applications are almost unlimited.

The advantages of the new LoopPET Clearboard ASLAN CRB 91 at a glance: 

  • PET with special coating (70% content of post-consumer recycled polyester) 
  • Thickness 50 µm, permanent polyacrylic pressure sensitive adhesive, 50 x 1.37 m 
  • Scratch-resistant and highly transparent 
  • High-tack adhesive, also compatible with UV curable inks
  • PVC-, VOC- and solvent-free product 
  • Dimensionally stable 
  • Classified according to flame retardant standard Euroclass EN 13501-1 (B - s1, d0) 
  • Outdoor durability of up to 5 years 
...weiterlesen

It's going to be velvety – CaressColour ASLAN CC 124

It's going to be velvety – CaressColour ASLAN CC 124

The year has a velvety start – with the new CaressColour ASLAN CC 124, a flocked, self-adhesive decorative film in 15 colours. This visually stunning film with its plush, tactile feel can be used for full surface coverage or plotter cut graphics.

The flock films are ideally suited to smooth, flat surfaces indoors. However, under certain conditions, short to medium-term outdoor use for seasonal advertising and promotion is also possible. The wide selection of 15 colours in the standard range, is supplemented by a further 16 colours which are available on request for an MOQ of 500 linear metres.

To aid application of the plotter cut graphics, we recommend the use of our SuperTackTape ASLAN TF 200 application tape. This tape demonstrates the precise level of adhesive strength and removability without damaging the flock.

The advantages of these self-adhesive flock films at a glance:

  • dense flocking for a luscious, velvety feel – Made in Germany
  • high colour fastness for long-lasting applications, plus colour effect on both sides
  • removable without leaving residue, from e.g. glass and metal, due to ASLAN‘s innovative, water-based adhesive system
  • very good plotting properties and easy to apply thanks to the high-quality silicone liner, PE-coated on both sides and material thickness of 400-450 µm
  • free of PVC and plasticisers
  • easy to clean and flock fibres can be raised up again
  • available in 15 colours – 16 additional colours on request: MOQ 500 linear metres
  • material width of 1.37 m
...weiterlesen

FESPA 2023 – come and visit us in Munich!

FESPA 2023 – come and visit us in Munich!

from May 23rd to May 26th 2023 the FESPA Global Print Expo opens its doors in Munich/Germany. Of course, ASLAN, the German specialist for self-adhesive films, will be exhibiting and will present several high-class, self-adhesive speciality films to the visitors – you are cordially invited!

Register for the fair and visit us in hall C2 on stand B10, to discover our brand-new self-adhesive films and experience further films from our well-known portfolio. Discounted tickets are available using the code FESdwvEaz86

A selection of our new self-adhesive films:

  • SparkleColour ASLAN SC 123: exciting and sparkling – glittering decorative film in six colours
  • CaressColour ASLAN CC 124: let’s get cosy – flocked decorative film in 15 different colours
  • Sustainable LoopPET series: digital printing films, metal effect films in silver and gold, and lamination films made of PCR (post-consumer recycled) PET
  • MonsterLAM ASLAN SL 05: lamination film for the protection of surfaces even in the most difficult conditions and suitable for UV prints
  • plus, many more speciality films from our comprehensive portfolio

 

Sign up here for your ticket for FESPA 2023 – we look forward to welcoming you and to having inspiring conversations!

...weiterlesen

Merry Christmas 2022...

and a happy New Year. We are on company holidays from December 24th, 2022 to January 1st, 2023.

When it shines and glitters...

When it shines and glitters it doesn't necessarily have to be Christmas. Just look at the new self-adhesive film SparkleColour ASLAN SC 123 and let your imagination sparkle too. The six exciting shades of gold, silver, black, white, red and green (available soon), are just waiting to be used for plotter cut graphics, or full-surface applications, on all smooth surfaces. And if that’s not enough, then there‘s more good news. For a minimum order quantity of just 500 linear meters, we can offer you 30 more glittering shades.

The structure of the glitter particles in this 350 µm self-adhesive polyester film brings a touch of glamour to shop displays, architecture features and trade fair designs. What’s more, the spectacular sparkly effect is double-sided and due to ASLAN’s highly transparent, water-based adhesive system, is ideal for attention-grabbing advertising and graphics on glass.

A special feature: We supply the product with a transparent film on the surface. This on the one hand serves as protection against loose glitter particles during processing, but on the other hand also acts as a transfer tape for plotted applications. The film is then plotted in reverse through the backing liner and the rest of the process is simply child's play. Seeing is believing, so check out how this works in our short YouTube tutorial.

The advantages of the six glittering films at a glance:

  • PVC-free, therefore dimensionally stable with no shrinkage
  • easy to apply, thanks to the stable 350 µm PET film
  • Six colours and 30 more on request (MOQ of 500 linear metres)
  • high-quality, structured feel
  • very good plotting properties (film is plotted from the back, mirrored through the liner)
  • The supplied surface protection film also serves as a transfer tape
  • Removable without leaving any residue, e.g.  on glass and metal
  • High volume of glitter particles for added brilliance and durability
...weiterlesen

New sustainable metal effect films in silver & gold

A further ASLAN self-adhesive film is now available in our unique LoopPET Series: LoopPET Metal ASLAN CRA 31. It’s a metallic film in silver or in gold, made of 70% recycled polyester.

The glossy gold and silver metal effect is visible on both sides. This makes the films ideal for applications on glass, where the overall appearance is stunning. What’s more, they are not only suitable for plotter cutting, but can also be printed with latex and UV curable inks.

The advantages of the new LoopPET Metal ASLAN CRA 31 at a glance:

  • PVC free metal effect film
  • The double-sided metal colour effect is ideal for designs on glass, for example with mirrored graphics applied behind the glass to protect against vandalism and environmental influences
  • Consists of polyester with 70% recycled content
  • For high-quality prints with latex and UV curable inks
  • Water-based adhesive for a more environmentally friendly combination
  • Dimensionally stable and no shrinkage
  • Outdoor durability 2 years
...read more

New digital printing film – highly transparent & sustainable

As promised, we are continually developing more environmentally friendly media. Our sustainably produced self-adhesive films are not a one-hit wonder. In fact, the concert has only just begun.

Brand new on stage: The transparent, glossy digital printing film LoopPET Clear ASLAN DRP 18. Like its two siblings, it is made of recycled polyester (recycled content 70%) and has a water-based adhesive. It is suitable for bonding on flat surfaces both indoors and outdoors and can be printed with latex and UV curable inks. The external durability of three years also adds to its sustainability.

LoopPet Clear ASLAN DRP 18 is not only more sustainable, but provides following advantages:
•    PVC free digital printing film for high-quality prints with latex an UV curable inks
•    70 % PCR-PET equals 120 recycled PET bottles
•    High transparency makes the film perfectly suited for applications on (shop) windows
•    Clean removable, solvent-free adhesive, suitable for wet applications
•    Solvent-free adhesive ensures eco-friendly combination of film and adhesive
•    Classified according to Euroclass flame retardant standard DIN EN 13501-1: B-s1, d0
•    High dimensional stability and no shrinkage

Would you like to produce a laminated print that is sustainable and has an impressive clear finish?  When used in combination with LoopLAM ASLAN SRL 19, both films being PVC-free with water-based adhesives, offers you have the ideal solution.
 

...read more

The perfect all-round solution for extremely difficult surfaces

Let's get straight to the point: MonsterTack ASLAN DFP 05 sticks, lasts, and does exactly what it promises.

This polymeric, glossy digital printing film with its amazing new adhesive formulation, which is highly resistant to solvent vapours and lubricating oil, offers assurance for your most difficult applications. And yes, we mean really difficult: trailer graphics for instance; plywood panels, equipped with a highly dirt-repellent surface. Decals on construction vehicles, agricultural and industrial machines, that are subject to extreme mechanical stress and heavy pollution. Other demanding applications include campers and mobile homes, petrol pumps, motocross vehicles, low-energy surfaces and ABS plastics - often used in household and electrical appliances. In fact, wherever extreme conditions prevail.

With the MonsterTack ASLAN DFP 05, you will soon have a film available for a multitude of demanding applications that will provide a rigorous, secure hold. This is an addition to ASLAN’s excellent portfolio of speciality digital print media, equipped with long-term removable to ultra-strong adhesive systems.

In addition, this special adhesive system offers so much more. Despite its extremely high adhesive strength, the MonsterTack ASLAN DFP 05 can be removed from low-energy surfaces and steel without leaving any film or adhesive residue. It can also be applied at low temperatures from -10° C and therefore offers flexibility and security in one.

Your advantages of MonsterTack ASLAN DFP 05 at a glance:

•    monster adhesion for the most difficult applications
•    resistant to solvent vapours and lubricating oil
•    highly flexible polymer film, ideal for rough surfaces
•    residue-free removability on low-energy surfaces & steel
•    bonding temperature from -10° C
•    no adhesive seepage from the edge of the film while printing or plotting
•    solvent-free adhesive

...to the article

Brilliant, extremely scratch-resistant mirror effect film in silver and gold

This high-quality self-adhesive film offers a striking, extremely high-gloss mirror effect. Applied to a flat surface, the film acts like a mirror, providing crystal clear reflections and making rooms appear bigger and brighter. The film surface is highly scratch-resistant, making sure the brilliant mirror effect is retained in the long term. A special feature of this polyester film is that the mirror effect is identical on both sides, providing stunning double-sided reflections on transparent surfaces.

...more

Adhesive, reusable ferrofoil with chalkboard surface

The products from the ASLAN ReApply series are ASLAN functional films that are equipped with a revolutionary adhesive system and can be easily applied to smooth surfaces.  The top of the ReApply is a combination of different variations of the well-known ASLAN memo board films.

After use the ASLAN ReApply can be rolled up, stored away and used again when required.

The face film of the ReApply FerroBlackboard ASLAN RA 640 is equipped with the combination of a magnetic iron foil and an easy-to-clean chalkboard foil. For example, glass and kitchen surfaces, doors, tiles, etc. can be transformed into memoboards in no time at all. Additionally, using chalk and liquid chalk pens, it is guaranteed to clean easily without the ghosting effect of former writing. When it is no longer needed simply remove it, roll it up and store it away for later use. If ReApply does not adhere well to the surface, such as matt and slightly textured surfaces, this can be increased by lightly spraying the back of the film with water.

...read more

MagicProtect Matt ASLAN SL 99

The protection film MagicProtect MATT ASLAN SL 99 has been developed to protect digital printing films and other surfaces against vandalism, graffiti and dirt. Spray paint and dirt slides off the matt surface of this self-adhesive film like water of a lotus Leaf.

The 80 µm polymeric, softened PVC film can be applied on smooth and curve surfaces.
When used as a laminate in combination with a digital print, this film can also be applied to rough surfaces, with the use of a heat gun, to excellent effect.
As spray paint will not adhere to the film‘s surface, vandals will be put off immediately from causing any further damage.
Any residue paint and dirt can easily be cleaned off the surface.

Surfaces that are often damaged by graffiti in areas open to the general public, can be protected with MagicProtect Matt ASLAN SL 99, whether as a laminate for a digital print or on its own. This film has an outdoor durability of three years.

...read more

Holographic ASLAN SE 72

Holographic ASLAN SE 72 is a silver self-adhesive film with an outstanding holographic effect. It’s a 50 µm thick PET-film and shimmers in the colours of the rainbow. The special features of the product include the double-sided effect and the fact that it comes seamless, i.e. without any visible transition of the effect, as is usually the case with such materials. This saves time and material when printing and cutting the product. The film is equipped with a water-based special adhesive from ASLAN and lasts up to 3 years outdoors. The material can be printed with Latex- and UV-curable inks. Holographic ASLAN SE 72 can be applied on smooth, even surfaces and is perfect for use in shop and trade fair construction as well as for visual merchandising. The product is available in the dimensions 1.01 x 25 m.

Two new ASLAN products with environmentally-friendly message

6 | 21 – ASLAN is expanding its range of environmentally-friendly and PVC free products for the sign making and digitally printing industry with two real highlights:
Digital printing film and protective laminate made from recycled polyester
LoopPET ASLAN DRL 19
is a white film for large format digital printing. It is made using 30% recycled polyester and heralds a series of products that are more than just PVC free, leaving a smaller carbon footprint. ASLAN's renowned Dryapply adhesive technology makes it easy to apply the film without bubbles and has excellent removability. The material can be printed using latex and UV curable inks.

The LoopLAM ASLAN SRL 19 laminate is the perfect match to protect the print. The content of recycled polyester of this highly clear film is 70%. Even though the product is designed as a protective laminate (liner/adhesive), it is possible to print it with UV curable and latex inks.

Both self-adhesive films are equipped with ASLAN's special and reliable water-based adhesives – thus the films contain not only recycled raw material, but are also free of solvents, PVC and VOCs.

Use of recycled raw materials for manufacturing
Worldwide the sign making and large format market is undergoing a strong rethinking process towards more environmentally friendly products. While a complete recycling is currently not an option, ASLAN has approached the matter differently. "We used raw materials which contain recycled components as a base for the new films." explains Dr. Petra Tschöpe, R&D manager of the manufacturer of high-quality self-adhesive speciality products.

The recycled polyester used is post-consumer recycled (PCR), for example old PET bottles which are sorted by colour and then shredded into small flakes according to material. These flakes are then mixed with new PET granules in varying proportions (70% for transparent, 30% for white) and then extruded to form new films. This creates an environmentally-friendly, forward-thinking composite of recycled raw materials for digital printing. White products are limited in the proportion of recycled contents in order to maintain the desired degree of whiteness. 

The 50 µm (1.9 mil) thick ASLAN films can be applied to smooth, flat surfaces. The self-adhesive films are ideal for use in shop fitting, trade show booths, visual merchandising and wherever value is placed on products that are a real greener alternative. Both products can be used indoors and outdoors and are available in the dimensions 1.37 x 50 m (53” x 50 yds).

Meet us at FESPA’s wide format virtual event

The FESPA Innovations & Trends virtual event takes place next May 26th and 27th. Join our live presentation on May 27th at 2:30 pm (BST)/3:30 pm (CEST) focusing our self-adhesive interior specialty films.

You will have the opportunity to meet us for individual sessions during the event. Visit our virtual booth and get in with us for a chat about our self-adhesive films, let’s talk about your individual requirements or just share more global information about our premium quality specialties made in Germany – we are looking forward to seeing you there!

Details to the event are available here https://www.fespa.com/en/events/2021/fespas-innovation-and-trends-2021-wide-format-graphics-decor

03 | 21 Bringing back some colour to our lives – with the brand new dichroic self-adhesive films from ASLAN. Two transparent dyed and four opaque films that shift colours depending on light conditions and viewing angle: ColourShift ASLAN SE 70 and ColourShift ASLAN SE 71.

The transparent self-adhesive film ColourShift ASLAN SE 70 is a 110 µm (4.3 mil) thick, glossy polyester film with special coating. Both effects, Nebula and Solar, are suitable for in- and outdoor applications on flat surfaces.

For communication and creativity

Find improvements, inspiration and ideas in our new ASLAN memoboard brochure. It is available for PDF download and summarizes different self-adhesive solutions for offices, the work from home, home schooling, shops, restaurants and private rooms.

Improve the walls in offices with our magnetically-receptive whiteboard and blackboard films. Find inspiration with our rear projection films and get ideas for company-branded workspaces at home. All together in a handy PDF brochure and available for download.

Simply log in to our website and go to the section sales aids in the user area –you will there find the brochure. You’re invited to use it for your marketing and sales activities!

And as a plus, please check out our YouTube video on how to create a multifunctional whiteboard with self-adhesive solutions from ASLAN that can be used for the work from home as well as for spare time.

 

What the world needs now ...

… is love, sweet love – do you still know the catchy tune from the sixties? Well, what the world needs now besides lots of love are solutions for our everyday lives in a new normality.

How can we assist? Simply by summarising some of ASLAN’s self-adhesive films with all their key characteristics for the current situation in a handy and lucid brochure. Find a few of our specialities that might help in difficult times in our new “social distancing” brochure:

  • self-adhesive floor graphic films that are certified according to slip resistance and fire safety classifications for indoor and outdoor applications
  • clean removable films for temporary hygiene advices in clear, white glossy or white matt versions
  • non-adhesive clear PET or rigid PVC films to build hygiene protective barriers
  • rear projection films to be applied on hygiene protective barriers to spend additional benefits to clear surfaces and using them for ads
  • scratch-resistant and easy to clean blackboard and whiteboard films for your work at home and home schooling
  • and lots more of self-adhesive solutions that are needed now and in the near future

We kindly invite you to use our brochure for your marketing, newsletters, websites, social media and so on: simply click here to start the download (5 MB) or get in touch with our sales team that loves sending you the PDF.

Information about our current delivery situation

As you are aware, the whole world is affected by the COVID-19 virus – a challenging situation that requires special actions.

To protect both customers and employees as well as to secure our production, ASLAN has already implemented necessary and possible steps. All colleagues that doesn’t necessarily have to attend the office are working from home. We want to ensure that the production of our self-adhesive specialities is guaranteed.

Our warehouse is fully stocked and we are able to deliver. This situation won’t change in the short-term. Worldwide shippings are working, lead times might be longer for your deliveries. Our logistics partners are very reliable and update us at least daily about new developments. If you have any special guidelines for deliveries in place, please let us know when placing the order. We will make sure our logistic partners will follow these.

We stay by your side, even during these challenging times and will support your business as good as possible. We can’t accomplish miracles, but we are giving our best.

ASLAN says “heads up“ – stay healthy, that’s most important.

Get ready for Xmas

10 | 19 Soon the festive Christmas looks will reach our city centres – this is the perfect time to procure the self-adhesive metal effect films by ASLAN for your glamorous Christmas campaigns! We will love to support your orders and your stock planning as well, in order to fulfil your customers’ needs for high-quality films by ASLAN.

Mirroring the mirror effect film

5 | 19 ASLAN, known as German specialist in self-adhesive films, launches a new solution of the special effect range: As a sister product to the popular MirrorEffect AntiScratch ASLAN SE 75 in silver and gold, there is now the new MirrorEffect SimplyApply ASLAN SE 76 available – a brilliant mirror effect film in silver that is, due to an adjusted adhesive formula, extraordinary simple to apply.

MirrorEffect SimplyApply ASLAN SE 76

Go for Gold: Our new special effect film in gold

07 | 18 ASLAN, the German developer, manufacturer and marketer known as a specialist in self-adhesive films, expands its portfolio of the special effect films: The successful self-adhesive Polyester film MirrorEffect AntiScratch ASLAN SE 75 is now – besides silver – also available in gold. Both selfadhesive mirror effect, anti-scratch polyester films are characterized by a brilliant mirror-like finish, along with a very high scratch-resistant surface which is unique in the market.

MirrorEffect AntiScratch ASLAN SE 75

The new self-adhesive protective film combines a bright look with a velvety-soft feel

04/18 | ASLAN, the German manufacturer of self-adhesive films for special applications, now offers a new protective laminate available in two different widths. The laminate has been specially developed for rollup and popup systems and has been optimised for the required widths.

The benefits of the matt EcoSoftTouch ASLAN SL 109 include its extremely brilliant colour reproduction of a printed product after finishing, as well as its scratch resistance. In addition, its velvety touch results in a true look & feel product. Whereas with today’s applications, matt protective laminates tend to swallow up a part of the colour gamut, EcoSoftTouch ASLAN SL 109 has the opposite effect. Colours appear brighter and shinier following treatment with this product.

EcoSoftTouch ASLAN SL 109

ASLAN presents new transparent digital printing film with ultra-strong adhesion

03/18 | ASLAN, German manufacturer of self-adhesive films for special applications, provides a new transparent digital printing film with ultra-strong adhesion. The self-adhesive film UltraTack transparent ASLAN DFP 06, especially designed for long-term applications, is now available for all applications requiring a transparent film.

Among all the advantages ranks especially the reliable adhesion on difficult surfaces including low-energy materials (i.e. plastic dustbins) but also on rough, uneven or cold surfaces. The digital printing films of the UltraTack range perform even well in application temperatures starting from 5°C (41°F).

UltraTack transparent ASLAN DFP 06

Make your Christmas promotion shine!

09/17 | With our high-quality self-adhesive films from the MetalEffect ASLAN CA 23 range, you can make all smooth surfaces sparkle. The newest addition to the range, the on-trend colour rosegold you are seeing everywhere right now, can now be easily integrated into shop window designs, visual merchandising concepts and shop fitting projects. The polyester film with an identical colour effect on both sides is perfect for the creation of plotted lettering and motifs as well as for full-surface designs indoors and outdoors.

MetalEffect ASLAN CA 23

ASLAN Print’nGo: Eye-catching floor graphics in only 2 steps

06/17 | The new ASLAN Print’nGo version with R9 non-slip safety class offers you the particular advantage that the film does not need an additional protective overlaminate thanks to its highly scratch-resistant print image: Just print and apply! The digital printing film is ideally suited for short-term applications on all smooth interior floors and its residue-free removal is as easy as its application. 

Print´nGo ASLAN DFP 33

ASLAN WrapTheHouse: now available in matt and transparent

05/17 | Our self-adhesive digital printing film, which permits you to creatively design rough facades and walls or turn them into an advertising space, is now also available as a matt white and transparent version. These two new products retain their matt finish even after application, and can be removed in one piece and without leaving residues within six months. Letterings and sharply contoured motifs can be realized fast and easy, without having to plot them. 

WrapTheHouse ASLAN DFP 45

ASLAN FerroSoft: Three new flexible ferrous films

03/17 | With our new ferrous films you can now transform smooth substrates even more easily into magnetically-receptive surfaces! The new films are extremely soft and flexible, making them easy to apply. As an additional benefit, all three variants can be stored and transported in a rolled-up condition. The self-adhesive films containing iron are available as a digital print version as well as with a whiteboard surface. The third anthracite-coloured version are ideal to combine with other self-adhesive films.

FerroSoft ASLAN FF 410

The digital printing films with ultra-strong adhesion now available in 4 versions

01/17 | ASLAN UltraTack, our digital printing film designed specifically for long-term applications on   hard-to-stick surfaces, is now available in both glossy and matt finishes and with either transparent or grey adhesive. The benefit of the NEW grey adhesive thereby is a high coverage of brightly coloured, patterned and high-contrast substrates.  

UltraTack ASLAN DFP 07

The new highly reflective mirror effect film

11/16 | This high-quality self-adhesive polyester film is characterized by a highly reflective mirror-like finish and a very scratch-resistant surface which is unique on the market. The film with the same mirror effect on both sides has particularly been designed for the decoration of smooth surfaces. It is the perfect choice for applications on large areas and plotted letterings or designs that are to reflect mirror images brilliantly in the long term. 

MirrorEffect AntiScratch ASLAN SE 75

WindowClear: The new transparent digital printing film

03/16 | Creating sharp-contoured, cut-out designs on glass, without having to plot. The user-friendly PVC-film WindowClear ASLAN DFP 18 makes it possible: While prints on the self-adhesive film are of brilliant quality, the non-printed areas ensure a good optical clarity thanks to their transparency.

WindowClear ASLAN DFP 18